Normativas

CM Group: based on a standard depth of 15–40 mm.

RM Group: standard depth of 60 mm.

For mounting plates and electrical panels.

With the ES system, waveguide techniques can be applied, allowing non-metallic fiber optic cables and plastic pipes or tubes to pass through an ES system in shielded environments.

If the cables are shielded, an EMI application of the ES or PE system will be more likely.

If the application uses an armored cable, it should be considered that electrical safety makes the use of a BG system recommended.

Delvalle electrical cabinets and boxes

The Delvalle handle with electronic opening is applicable in small installations, where it is not necessary to connect different units together and where it is necessary to keep a control

This device prevents accidents by alerting the operator that the electrical system is live. Suitable for connection to three-phase or single-phase lines.

It is also a phase loss and phase sequence monitoring device: in case of failure, it warns of the error. The functions of the device can be increased with contacts

Machinery

Airports

Road signs

Food and beverages

Can be placed in corrosive or outdoor areas if needed

They are used in traffic control systems, labeling machines, crane systems, telecommunication systems, as well as in machines for the food industry.

Harineras

Maritime

Shopping centers

Electric utilities

Pharmacist and physician

Ideal for outdoor computer placement, weather stations, telephony, CCTV, ETSI, fiber optics, security and video surveillance, street lighting, telecommunications.

Paper

Urban facilities

As its name suggests, it is commonly used on roads, either for signaling or lighting, as well as in outdoor weather stations.

Offshore

Gas measurement in high temperature areas

Electrical panel approved for the wind and solar industry, transformer stations, telecommunications and outdoors, due to its advantages of durability and resistance against agents.

Laboratories

Areas with fiberglass dust

Specially designed for installation in outdoor environments where weather conditions are adverse, such as in the maritime sector, or for public lighting applications.

Military zones

Specially designed for the installation of automation, machine controls, meters, heating, air conditioning, control systems, electrical distribution, industrial networks.

Our Storm Series cabinets are specially designed for outdoor use.

Areas with high ambient dust

Areas with high environmental corrosion

Specially designed for the installation of automation, machine controls, meters, heating, air conditioning, control systems, electrical distribution, industrial networks.

Our public lighting cabinets, given their design, finish and watertightness, are specially designed for use in the environment, festivals, Christmas light displays, etc.

Specially designed for the placement of pushbuttons, pushbutton panels, cable entry, etc.

Electronic circuits very sensitive to excess humidity

Automatons

Hydraulic Power Unit Charts

Pneumatic panels and instrumentation our cabinets

Our Tropico Series outdoor enclosures, given their design, finish and watertightness, are specially designed for telecommunications, public lighting, ancillary services, etc.

Specially designed for maximum flexibility with respect to its use. Thanks to this we can see it in machine controls, control systems, electrical distribution control.

Specially designed for the installation of automatisms, machine controls, meters, heating, air conditioning, control systems, electrical distribution, industrial networks.

PLC’S

Areas with extreme temperatures or hostile environments

Pressure, flow, power and temperature measurement enclosures to moving systems

Specially designed for the installation of automatisms, machine controls, meters, heating, air conditioning, control systems, electrical distribution, industrial networks.

Outdoor computers

Our 19″ outdoor rack cabinets Storm Series, given its design, finish and watertightness are specially designed for outdoor use. As its name says

Pneumatic control panels

Specially designed for outdoor installations where superior quality and durability are required. Electrical panel approved for the food industry

Specially designed for cabinets placed in areas where it is necessary to reduce humidity inside the cabinet.

Assembly and supply of centralized lubrication cabinets

Due to its reinforced structure, it becomes a suitable enclosure for telecommunication equipment

Specially designed for cabinets placed in areas where a homogeneous temperature inside is necessary, PLCs, outdoor computers, automata

Agricultural Zones

Temperature Control Cabinet Protection

Specially designed for outdoor installations. Thanks to its versatility, it can be used in the food and pharmaceutical industries, where hygiene is essential

Specially designed for the installation of automation systems, machine controls, in outdoor, corrosive zones, food industries, and wherever presence, quality…

Port Areas

Stainless steel housings are also available for applications where hygiene and/or corrosion resistance are essential

Transformer Centers for Outdoor Installations

Ideal for the naval or maritime sector, given its resistance

The PC HMI cabinet for food industry is specially designed for the general industry, food industry, clean rooms, precooked foods, dairy companies, wineries, or any other place

Desert Areas

Our PC cabinets, due to their design, finish, and sealing, are specially designed for industrial environments, manufacturing and processing plants, as well as more specifically

Especially designed for placement on top of our cabinets to achieve perfect cooling in our electrical and electronic equipment

Specially designed for outdoor use in desert areas with high direct solar incidence.

Our compact PC cabinets, due to their design, finish, and sealing, are specially designed for industrial environments, manufacturing, and processing plants

Specially designed for the food industry and clean rooms, precooked products, dairy companies, wineries, or any other place where a clean environment is essential

Ideal for the installation of telecommunications racks, computers, telemetry, surveillance cameras, radars, weather stations, telephony, CCTV, ETSI, fiber optics…

Petrochemical Sectors

Electrical Cabinets for Outdoor Use

Nuclear Power Plants

Optional silicone gasket: from -60°C to +180°C (reduced exposure up to +350°C)

Specially designed for telecommunications, railway signaling, air signaling, medicine, military industry, or where extra protection is needed

Industrial Manufacturing

Specially designed for the food, chemical, pharmaceutical industries, transformation centers, telecommunications, and outdoor use due to its durability and resistance advantages

They are used in wind turbines, traffic control systems, labeling machines, crane systems, telecommunications systems, as well as machines for the food industry

Specially designed for areas subjected to high seismic stress or constant vibrations

Temperature resistance: from -40°C to +100°C (short-term exposure up to +160°C)

Public services and mining

Accessory for Cabinets and Electrical Panels

Specially designed for the installation of push buttons, button panels, cable entries, etc. Its use is approved for the wind industry, solar, transformer stations, telecommunications

Control boxes are designed for the placement of screens, HMIs, push buttons, and any component necessary to facilitate machinery control. They are installed at machine level

Electrical Cabinets with Maximum Voltage 1000 V

Paper and packaging

RoHS Directive 2011/65/EU Compliant

Wastewater

Built under Low Voltage CE Directive 2014/35/EU

Desert, Tropical, High Mountain Areas

UL Certificate Nema 4x, 12, 3r, and 1 upon request. File No. E342220

Water Treatment

Industry 4.0

Thermal Insulation for Electrical Panels TermoTisa X220

IK10 Impact Resistance Rating